InkBird CO2 Controller

$269.99

Keep your CO2 levels in check for optimal mushroom growth. Plug an exhaust fan into your Inkbird CO2 controller to increase fresh air exchange in your grow room when needed.

Description

Keep your CO2 levels in check for optimal mushroom growth. Plug an exhaust fan into your Inkbird CO2 controller to increase fresh air exchange in your grow room when needed.

This unit comes with B01 Sensor probe, suitable for operating in the high humidity of a mushroom grow room.

2 Years Inkbird Warranty: ICE&FCC certificated, safe and reliable. INKBIRD will provide 2 years warranty for the controller.
WORK1: The CO2 regulator or generator; WORK2: The exhaust fan.
    1. Dual Relays: The CO2 controller can be connected to the CO2 regulator or generator and the exhaust fan simultaneously. WORK1: The CO₂ regulator or generator; WORK2: The exhaust fan.
    2. Programmable: The controller has adopted the NDIR sensor to get a precisely CO2 ppm level, equipped with 2 display windows to display the current measured CO2 concentration value and the set CO2 concentration value simultaneously, supports CO2 calibration and high/low CO2 concentration alarm.
    3. Easy to Use: Comes with everything you need to start the CO2 system, no more complicated installation, the controller will turn on/off the CO2 generator or regulator and the fan automatically according to your settings.
4. B01 Sensor: Widely applied in agricultural and livestock industries, greenhouses, industrial fields and general ventilation HVAC.
Package Contents
ICC-500T*1
CO2 Sensor*1
User Manual*1
Warranty Card*1
Specification
    • Brand: INKBIRD
    • Model: ICC-500T
    • Input Power: 100~240Vac 50/60Hz 10A MAX
    • Output Power: 100~240Vac 50/60Hz 10A MAX
    • (two sockets)
    • Disconnection Method: Type 1B
    • Rated Impulse Voltage: 1500V
    • Automatic Operation: 6000 cycles
    • Ambient temperature:
Working Environment: room temperature
Storage Temperature: 0℃~60℃/32℉~140℉
Storage Humidity: 20~80%RH (No freezing or condensation)
    • Warranty Period: 2 years
    • Measurement Range: 0~9,999 ppm
    • Sensing Method: NDIR
    • Sensor Working Temperature: 0℃~50℃/32℉~122℉
    • Working Humidity: 0~95%RH (non-condensing)
Calibration Method: CO2 reading calibration(current CO2 concentration Value+CO2 calibration value)
(In addition to ERROR and RESPONSE TIME, several other parameters of the two sensors are the same)
    • Error: ± (30 ppm+3% MV)–S01
    • Response Time (63%): 20 seconds—S01
    • Error: ± (30 ppm+5% MV)–B01
    • Response Time (90%): 120 seconds—B01

Additional information

Weight 0.89 kg
Dimensions 22 × 13 × 14 cm